Hand Pumps for home and the cottage
The overall length of the well pump in the basic package is 2.5 m, measured from the well cover to the bottom of the cylinder. The base of the cylinder
features a 1 ¼” internal thread, to which an attachment to connect 40 mm polythene suction pipe can be fitted. The maximum length of the suction pipe is 6 metres. If the suction pipe is longer than 1.5 metres a bottom valve must be fitted.
The Nira 67 pump’s cylinder can be lowered up to a maximum of 21 metres using 0.5, 1.0 or 3.0 metre pipe modules. Then the maximum depth of the Nira 67 is 27.5 metres from the well cover when using 21 m pipe modules and 6 metres suction pipe. Nira 1 Antique or Nira 3B pump’s cylinder can be lowered up to a maximum of 6 metres, so the maximum depth the Nira 1 or Nira 3B pump can reach (measured from the well cover) is therefore 12.5 metres.
3 different models
Nira 1 Antique garden pump ( 2,50M)
This set comprises a complete garden well pump. The length of the assembled pump is around 2.5 m from the well cover to the base of the suction cylinder. The cylinder base features a 1 ¼” internal thread, to which an attachment for a 40mm suction pipe and bottom valve can be fitted if the suction pipe is longer than 1.5 metres. 6 metres is the maximum suction pipe length. The cast iron body of the pump is plastic coated on the inside.
PRICE: 902,84€ (VAT:0%)
Nira 3B garden pump (2,50M)
This pump is intended for pumping drinking and general household water. The overall length of the pump is around 3.5 m; approx. 2.5 m from the well cover to the base of the cylinder. The base of the cylinder features a 1 ¼” internal thread, to which a suction pipe and bottom valve can be fitted if the suction pipe is longer than 1.5 metres. 6 metres is the maximum suction pipe length.
PRICE: 643,74€ (VAT:0%)
Nira 67 garden pumps
This stylish pressure pump suits both traditional garden wells and drilled wells. The NIRA 67 pump develops around 1 bar of pressure. The spout is equipped with a 3/4” internal thread, to which a standard garden hose fitting can be attached. A hose allows moving the water further, also uphill from the well pump. When used in a drilled well, the pump’s cylinder can be fitted to depths of up to 20 metres using extra pipe modules. Available in a number of different colours. The composite construction upper body cover of the pump can also be changed to a different coloured one after the pump has been fitted. Comes in a light and easy to transport package.
• Upper body cover colours: blue, red , grey. Lower body covers and base: cast aluminium alloy.
• Rust-proof, freeze-proof design.
This Nira 67 well pump set includes 2x1m pipe modules and a 0.5m cylinder.