Nira 6B hand pump set

Nira 6B hand pump set

The Nira 6B hand pump set includes accessories needed for installation, not including suction and pressure side pipes.
When installing the pump please be aware that the length of the suction pipe affects the pump’s maximum suction lift height. P 1" (32 mm) is normally used as suction pipe, with a bottom valve fitted at the end. The Nira 6B can momentarily take around 3 Bar pressure. The pump must not be fitted to a network where it is continuously subject to pressure. If the Nira 6B pump is used for pumping household water and is stored in a place where there is a risk of freezing, be sure to thoroughly empty it of water. Delivered in a cardboard box.
When the pump is attached to a fuel tank, make sure the tank cannot empty itself (the siphon effect).