"Nira 9 hand pump, viton 1 1/4""" | Käsipumput koti- ja mökkikäyttöön | Verkkokauppa | Nira

"Nira 9 hand pump, viton 1 1/4"""

Price: 464,05 EUR 374,23 EUR (vat 24,00 %) (vat 0 %)

  • Item code 1122
  • Availability 3 Pcs
  • Freight cost 16,72 EUR 13,48 EUR Tooltip

Nira 9 hand pump, viton 1 1/4"

Nira 9 oil and water pump with viton seals. Can be use with liquids such as petrol (gasoline). When installing the pump please be aware that the length of the suction pipe affects the pump’s maximum suction lift height; 10 m of horizontal suction pipe lessens the possible lift by approx. 1 metre. P 1" (32 mm) is normally used as suction pipe, with a bottom valve fitted at the end.

Internal 1 ¼” threads for attachment.
The Nira 9 can momentarily take around 3 bar of pressure. The pump must not be fitted to a network where it is continuously subject to pressure. If the Nira 9 pump is used for pumping household water and is stored in a place where there is a risk of freezing, be sure to thoroughly empty it of water.

When the pump is attached to a fuel tank, make sure the tank cannot empty itself (the siphon effect).

Nira 9 product card

Material Silumin casting, steel, stainless steel, viton.
Suitability petrol, turpentine, engine cleaners
Frost resistance -5C
Weight 5,8 kg
Package Plasticpack
Suction height 4 m without bottom valve and 8m with bottom valve
pumping capacity 60L /min
Pressure 1 bar
Country of Origin Finland

 
asiakaspalvelu

Customer service / asiakaspalvelu
+358(0)10 830 6713

 

Nira handpumps

Over 100 years' experience making pumps for water, oil or fuel.